
The iQ-Trigger-T enables the precise determination of the trigger release using an electronically controlled triggering. It plays an essential role in all time measurements, such as shutter lag, when assessing digital cameras.
The iQ-Trigger-T takes over the interaction of a fingertip on capacitive touch screens, without any pressure. After the software-controlled start, the contact finger responds with a delay of maximum 0.5 ms and thus provides precise starting values for different measurement tasks. The iQ-Trigger-T attaches to all smooth and clean surfaces with straps made of thermoplastic elastomer (TPE), which come in two sizes.
Integration with other products
It can be combined with many different devices from our product list, for example:
- When using the iQ-Trigger with an LED-Panel, you can sync the start of the LEDs with the release of the iQ-Trigger-T.
- STEVE desktop software includes controlling iQ-Trigger-T to allow an easier more complete solution.
- When using iQ-Trigger-T with a lightSTUDIO-M, it can be controlled from the lightSTUDIO desktop software to release the camera at specific moments.
- The C++ APIs iQ-Drive and iQ-Trigger can be used to integrate iQ-Trigger-T in your environment when using it on one of our motor-driven test stands.
With the iQ-Trigger USB-Box, iQ-Trigger-T can be a stand-alone solution. Either it is software controlled or manually by wired remote release. The control software allows the use of iQ-Trigger-T out-of-the-box. The API offers the possibility to integrate iQ-Trigger-T flexibly into your environment and implement a release procedure.
Principle | remote controllable trigger for devices with capacitive touch screens |
Latency | < 0.5 ms |
Specialties |
|
iQ-Trigger-T
- iQ-Trigger-T
- 2 x TPE-band 90 mm
- 2 x TPE-band 130 mm
- Microfibre cloth
- iQ-Trigger-T storage box
- iQ-Trigger USB-Box
- Wired remote release
- Power supply
- USB cable (connection iQ-Trigger USB-Box to PC)
- 7.5 m extension cable for iQ-Trigger-T (6.3 mm TRS connector)
- iQ-Trigger API
iQ-Trigger + iQ-Trigger-T
- iQ-Trigger-T
- 2 x TPE-band 90 mm
- 2 x TPE-band 130 mm
- Microfibre cloth
- iQ-Trigger-T storage box
- iQ-Trigger (electromechanical finger including hydraulic arm and mounting)
- Manfrotto L bracket and mounting plate (type 405)
- iQ-Trigger USB-Box
- Wired remote release
- Power supply
- USB cable (connection iQ-Trigger USB-Box to PC)
- 7.5 m extension cable for iQ-Trigger-T (6.3 mm TRS connector)
- Connection cable (iQ-Trigger USB-Box to LED-Panel)
- iQ-Trigger API
iQ-Trigger-T add-on
- iQ-Trigger-T
- 2 x TPE-band 90 mm
- 2 x TPE-band 130 mm
- Microfibre cloth
- iQ-Trigger-T storage box